黄群英;李春京;李艳芬;刘少军;吴宜灿;李建刚;万发荣;巨新;单以银;郁金南;朱升云;张品源;杨建锋;韩福生;孔明光;李合琴;室贺健夫;长坂琢也;

• 1:中国科学院等离子体物理研究所
• 2:中国科学院等离子体物理研究所
• 3:中国科学院等离子体物理研究所
• 4:中国科学院等离子体物理研究所

摘要(Abstract)：

低活化铁素体/马氏体钢(RAFM钢)被普遍认为是未来聚变示范堆和聚变动力堆的首选结构材料。国际上给予了高度重视,许多国家都在研发其特有的RAFM钢。中科院等离子体物理研究所在与国内外多家单位的合作下发展了中国低活化马氏体钢———CLAM。本文总结了CLAM钢研制发展的主要进展,包括其成分优化设计、冶炼加工制备工艺、物理性能、机械性能、辐照性能及与液态LiPb的相容性等测试与研究以及各种焊接工艺研究等,并对今后的发展方向进行了展望。

关键词(KeyWords)： 聚变堆;低活化材料;CLAM钢;性能测试

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(10375067、10675123);; 中科院知识创新工程项目;; 973计划项目

作者(Authors): 黄群英;李春京;李艳芬;刘少军;吴宜灿;李建刚;万发荣;巨新;单以银;郁金南;朱升云;张品源;杨建锋;韩福生;孔明光;李合琴;室贺健夫;长坂琢也;

参考文献(References)：

• [1]Klueh R L,Gelles D S,et al.Ferritic/MartensiticSteels-Overview of Recent Results[J].J.Nucl.Mater.,2002,307-31:455-465.
• [2]Kohno Y,Kohyama A.Mechanical Property Changes ofLow Activation Ferritic/Martensitic Steels after NeutronIrradiation[J].J.Nucl.Mater.,1999,271-272:145-150.
• [3]Klueh R L,Alexander DJ,et al.The Effect of Tanta-lumon the Mechanical Properties of a 9Cr-2 W-0.25V-0.07Ta-0.1C Steel[J].J.Nucl.Mater.,1999,273:146-154.
• [4]Huang Q,Wu Y,Li C,et al.R&D Activities of FusionMaterial and Technology for Liquid LiPb Blankets atASIPP[C].proceedings of 8thChina-Japan Symposiumon Materials for Advanced Energy Systems and Fission&Fusion Engineering,Sendai,Japan,Oct.4-8,2004:237-243.
• [5]黄群英,郁金南,万发荣,等.中国低活化马氏体钢的发展[J].核科学与工程,2004,24(1):56-64.
• [6]Huang Q,Li C,Li Y,et al.Progress in Developmentof China Low Activation Martensitic Steel for FusionApplication[C].presented at the 12thInter.Conf.OnFusion Reactor Materials,Santa Barbara,USA,Dec.4-9,2005.
• [7]Wu Y,Qian J,Yu J.The fusion-driven hybrid systemandits material selection[J].J.Nucl.Mater.,2002,307-311:1629-1636.
• [8]吴宜灿,柯严,郑善良,等.聚变驱动次临界堆概念设计研究[J].核科学与工程,2004,24(1):72-80.
• [9]吴宜灿,汪卫华,刘松林,等.聚变发电反应堆概念设计研究[J].核科学与工程,2005,25(1):76-85.
• [10]Wu Y,Liu S,et.al.Design Concept and Testing Strat-egy of a Dual Functional Lithium Lead Test BlanketModule for ITERand EAST[C].presented at the 21stI AEA Fusion Energy Conference,Chengdu,China,16-21 October,2006.
• [11]Wu Y,Huang Q,et.al.Design Status and Develop-ment Strategy of China Liquid Lithium-Lead Blanketsand Related Material Technology[C].presented in the12thInternational Conference on Fusion Reactor Materi-als,Santa Barbara,California,USA,Dec.4-9,2005.
• [12]Ki mura A,Kayano H,Misawa T.Designation of alloycomposition of reduced-activation martensitic steel[J].J.Nucl.Mater.,1994,212-215:690-694.
• [13]Rieth M,Schirra M,Falkenstein A,et al.Eurofer97Tensile,Charpy,Creep and Structural Test[R].FZ-KA6911,2003.
• [14]Kohyama A,Hishinuma A,Gelles D S,et al.Low-Ac-tivation Ferritic and Martensitic Steels for Fusion Appli-cation[J].J.Nucl.Mater.,1996,233-237:138-147.
• [15]Huang Q,Li J,Chen Y.Study of Irradiation Effects inChina Low Activation Martensitic steel CLAM[J].J.Nucl.Mater.,2004,329-333:268-272.
• [16]Huang Q,Zheng S,Chen Y,et al.Activation Charac-teristics of Fuel Breeding Blanket Module in FusionDriven Subcritical System[J].J.Nucl.Mater.,2002,307-311:2384-2387.
• [17]陈明亮,黄群英,等.聚变发电反应堆双冷液态锂铅包层活化分析和废料处理[J].核科学与工程,2005,25(2):178-183.
• [18]黄群英,陈明亮,彭蕾,等.聚变驱动次临界堆双冷嬗变包层材料活化计算与分析[J].核科学与工程,2004,24(3):269-276.
• [19]黄群英.聚变堆结构材料———中国低活化马氏体钢设计与性能研究[D],安徽合肥,中国科学院等离子体物理研究所,2006.
• [20]Hirose T,Shiba K,Sawai T,et al.Effects of heattreat ment process for blanket fabrication on mechanicalproperties of F82 H[J].J.Nucl.Mater.,2004,329-333:324-327.
• [21]李艳芬,黄群英,吴宜灿.CLAM钢冲击和拉伸性能测试与研究[J].原子核物理评论,2006,23(2):151-154.
• [22]Zhao F,Wan K,Wan F,et al.The structure and prop-erties of Low Activation Ferritic/Martensitic Steels[C],Material Science Forum,2005,475-479:1383-1386.
• [23]Misawa T,Adachi T,Saito M,et al.Small punch testsfor evaluating ductile-brittle transition behavior of irradi-ated ferritic steels[J].J.Nucl.Mater.,1987,150:194-202.
• [24]Kurishita H,Kayano H,Narui M,et al.Current statusof small speci men technology in Charpy i mpact testing[J].J.Nucl.Mater,1994,212-215:1682-1687.
• [25]Li Y,Huang Q,et al.Mechanical Properties and Micro-structures of China Low Activatio Martensitic Steel Com-pared with JLF-1 JOYO-2-HEAT[C].The 12thInter-national Conference on fusion reactor materials(IC-FRM-12),Santa Barbara,California,USA,Dec.4-9,2005.
• [26]Li Y,Huang Q,Wu Y,et al.Effects of Addition of Yt-trium on Properties and Microstructure for China LowActivation Martensitic Steel(CLAM)[C].The 24thSymposiumon Fusion Technology Programme Summa-ry,Warsaw,Sept.11-15,2006.
• [27]Tsuzuki K,Shinohara K,Kamiya K,et al.Investiga-tion of Compatibility of Low Activation Ferritic Steelwith High Performance Plasma by Full Covering of In-side Vacuum Vessel Wall on JFT-2 M[J].J.Nucl.Ma-ter.,2004,329-333:721-725.
• [28]Tsuzuki K,Sato M,et al.Recent Activities on theCompatibility of the Ferritic Steel Wall with the Plasmain the JFT-2 M Tokamak[J].J.Nucl.Mater.,2002,307-311:1386-1390.
• [29]李强,黄群英,郁金南,等.CLAM钢、Eurofer97钢与钨在HT-7托卡马克中辐照后的表面分析[J].核科学与工程,2004,24(1):157-163.
• [30]Li C,Huang Q,Feng Y,et al.Interaction of CLAMSteel with Plasma in HT-7 Tokamak during High Pa-rameter Operation[J].Plasma Science and Technology,to be published.
• [31]Glasbrenner H,Konys J,et al.Corrosion of ferritic-martensitic steels in the eutectic Pb-17Li[J].J.Nucl.Mater.,2000,283-287:1332-1335.
• [32]Konys J,Krauss W,et.al.Corrosion behavior of EU-ROFERsteel in flowing eutectic Pb-17Li alloy[J].J.Nucl.Mater.,2004,329-333:1379-1383.
• [33]Huang Q,et al.Corrosion Experi ment in the First Liq-uid Metal LiPb Loop of China[C].The 24thSymposiumon Fusion Technology Programme Summary,Warsaw,Sept.11-15,2006.
• [34]Cardella A,Rigal E,Bedel L,et al.The ManufacturingTechnologies of the European Breeding Blankets[J].J.Nucl.Mater.,2004,329-333:133-140.
• [35]Norajitra P,Rei mann G,Ruprecht R,et al.HIP Exper-i ments onthe First Wall and Cooling Plate Speci mens forthe EU HCPB Blanket[J].J.Nucl.Mater.,2002,307-311:1558-1562.
• [36]Oda M,Kurasawa T,Kuroda T,et al.Devolopment ofHIP Bonding Procedure and Mechanical Properties of HIPBonded Joints for Reduced Activation Ferritic Steel F82 H[R],JAERI-Tech 97-013,1997.
• [37]Rigal E,Briottet L,Dellis Ch,et al.HIP DiffusionBonding and Forming of Martensitic Steel for ITER TestBlanket Modules[C].proceeding of the 21stSymposiumon Fusion Technology,2000,p.1223-1226.
• [38]李春京,黄群英,吴宜灿,等.中国低活化马氏体钢(CLAM)热等静压扩散焊接初步研究[J].核科学与工程,2007,1.
• [39]Lix,Yu G,Yu J,et al.Al based coating on martensiticsteel[J].J.Nucl.Mater.,2004,329-333:1407-1410.
• [40]Jitsukawa S,Tamura M,et al.Development of an exten-sive database of mechanical and physical properties for re-duced-activation Martensitic steel F82 H[J].J Nucl.Ma-ter.,2002,307-311:179-186.
• [41]Sharafat1 S,Ghoniem N,Odette R,et al.A Damage-Mechanics Based Approach to Structural Design of ITERComponents[C].presented at US-ITER TBM Meeting,UCLA,Nov.3-5,2003.
• [42]Karditsas PJ,Lloyd G,Walters M,et al.The EuropeanFusion Material properties database[J].Fusion Eng.&Des.,2006,81:1225-1229.